Temperature and RH Alarm History

The temperature and humidity alarm history report is used to report on the alarms for the selected alarm groups within the specified date and time range. When you navigate to this report, you will be presented with the following parameter selections screen from which you can select the reports date and time range, the alarm groups to report on, and wether to report on Temperature, RH or both. Note that the alarm group and Temperature/RH selections are multi selectable. Once you've specified the desired parameters, click on the Execute button to execute the report.

When the report is finished executing it will be displayed with the ability to print or export the report. Along the top of the displayed report you will notice the page navigation, zoom, search, export and print options. The filer criteria section of the report displays the options that you set in the report parameter section, and the report section displays the report output. Please refer to the table below for details on the columns displayed in the report.

Column	Description
Alarm Date & Time	Date & Time of the alarm state.
Tag Name	The name of point in alarm.
Group	The alarm group in which the point in alarm belongs to.
Alarm State	The alarm state.
Alarm Type	The type of alarm (Lo, Hi, HiHi, etc.)
Alarm Value	The value at alarm.
Exceeded Limit	The alarm limit that has been exceeded.
Alarm Duration	The duration of the alarm from when the limit was exceeded to when it returned to a value within the limit.
Alarm Comment	Initially the comment is the description of the point in alarm. Once the alarm has been acknowledged, the comment field will contain the username of the person that has acknowledged the alarm followed by the comment that they have provided whilst acknowledging the alarm.