The Control mimic provides an overview of the system in a tabular format with the current data read from the driver. The first row below the title is the information panel highlighting the current alarm status, the Temperature and Humidity devices statuses, and the communication status to the various types of devices associated with the system. Below the information panel are tables with data from the particle counters, temperature / humidity devices, pressure sensors, and the receiver and repeater statuses for devices used with the wireless temperature and humidity devices. The cell background colour for the data tables specify the current alarm state of the point as follows:
Information Panel Data |
Description |
Time & Date |
The current system Time & Date |
Currently Logged Operator |
The currently logged in operator. (Note: If no one is logged in, then "None" is displayed). |
Current Alarm Status |
The current status of Alarms is displayed here. If there are unacknowledged alarms, "Unacknowledged Alarms" is displayed with the background flashing red/yellow. If there are no new unacknowledged alarms, "No New Alarms" is displayed on a green background. |
Temp / RH Device Status |
If any of the temperature or humidity devices are reporting a Status message that requires investigation, this status is flagged as "Check Devices" with the background flashing red/yellow . If all the Status messages good, then "Good" is displayed on a green background. |
Temp / RH Communication Status |
If the communication with the temperature and humidity devices are good then "Good" is displayed on a green background, otherwise "Device Communication Failure" is displayed on a red background. |
Particle Counter Communication Status |
If the communication with the particle counters are good then "Good" is displayed on a green background, otherwise "Device Communication Failure" is displayed on a red background. |
Pressure Sensor Communication Status |
If the communication with the pressure sensors are good then "Good" is displayed on a green background, otherwise "Device Communication Failure" is displayed on a red background. |
Alarm |
Cell Background Colour |
No Alarms |
Green |
Alarm Limit Exceeded (except Particle Counts) (Lo or Hi Limit) |
Red |
Particle Count Alert Limit Exceeded (Hi Limit) |
Amber |
Particle Count Action Limit Exceeded (HiHi Limit) |
Red |
Control