The batch alarm history report is used to report on the alarms for selected particle counter(s) and batch number. When you navigate to this report, you will be presented with the following parameter selections screen from which you can select the particle counter(s) and type in the batch number to report on. Note that the particle counter selection is multi selectable. Once you've specified the desired parameters, click on the Execute button to execute the report.
Batch Alarm History Parameters
When the report is finished executing it will be displayed with the ability to print or export the report. Along the top of the displayed report you will notice the page navigation, zoom, search, export and print options. The filer criteria section of the report displays the options that you set in the report parameter section, and the report section displays the report output. Please refer to the table below for details on the columns displayed in the report.
Column |
Description |
Alarm Date & Time |
Date & Time of the alarm state. |
Tag Name |
The name of point in alarm. |
Group |
The alarm group in which the point in alarm belongs to. |
Alarm State |
The alarm state. |
Alarm Type |
The type of alarm (Lo, Hi, HiHi, etc.) |
Alarm Value |
The value at alarm. |
Exceeded Limit |
The alarm limit that has been exceeded. |
Batch No |
The Batch Number associated with the alarm. (This only applies to alarms associated with a particle counter.) |
Alarm Duration |
The duration of the alarm from when the limit was exceeded to when it returned to a value within the limit. |
Alarm Comment |
Initially the comment is the description of the point in alarm. Once the alarm has been acknowledged, the comment field will contain the username of the person that has acknowledged the alarm followed by the comment that they have provided whilst acknowledging the alarm. |
Batch Alarm History Report