Features | Benefits |
| Has four particle size channels: 0.3μm, 0.5μm, 1.0μm and 5.0μm | Enables you to monitor the relevant sized particles in your clean areas from ISO class 9 down to ISO class 4 |
| Mass flow board | Ensures that the amount of sample air drawn in is accurate |
| Capable of producing immediate pass/fail reports for EU GMP Annex 1, FS209E (Federal Standard), ISO 14644.count data, profiles and settings | Fast and easy method of relevant data retrieval |
| Unit ID, username, location and timestamps on all printouts | Improves traceability of all samples taken |
| Colour touch screen menu | Easy and clear navigation, including touch screen QWERTY keyboard for easy entry of user data |
| Uses a filtered external exhaust dually emissions tested and certificated to pass ISO class 3. | This ensures the particle counter has minimal impact on your clean room; all CLiMET particle counters are individually emissions tested and certificated to pass ISO class 3. This ensures that the counter will not contaminate your environment |
| External exhaust port | Allows for the return of filtered exhaust air to the sampled environment (e.g. ideal for use with negative pressure isolators) |
| Lightweight and portable | Easy to handle; can be placed in most isolator hatches if necessary |
| Pharmaceutical grade 316 stainless steel enclosure designed with smooth contoured edges | Easy to clean, rugged, Faraday cage design means the sensor will not pick up 'counts' from outside electrical interference and is also unlikely to attract particles to its surface |
| Up to 5 hours continuous battery operation | Mains power not necessary for extended periods of use |
| Built in security | Allows you to control up to 4 levels the access to the particle counter using individual usernames and passwords |
| Can be calibrated to ISO 21501-4. | Ensures calibrations carried out in this way provide the highest level of accuracy |
| Built in USB interface | Connects to a USB drive to allow: Saving of stored data to USB drive, loading current settings from the USB drive and saving current settings to the USB drive. When using the USB interface, download of data is automatically CFR 21 Part 11 compliant. |
| 'Out of Calibration' protection | Supervisor controlled function allowing the instrument to be set-up to prevent data collection if the unit is past its 'Next Calibration Due' date |
;)
ISO 9001